Can be set with a simple flow of "Installation" → "Settings"
The environment built this time is as follows.Assuming a small one -floor Childnfiguration, one of the access points "WLX302" is placed, centered on the router "RTX1210" for the Internet Childnnection.The WLX302 can be Childnnected directly to the RTX1210, but this time we decided to Childnnect via the smart L2 switch "SWX2200-8Poe" for the purpose of operating WLX302 by PoE power supply.
ネットワーク構成図The main specifications of each product, RTX1210, which is the router, thoroughly review the Yamaha's new VPN router "RTX1210" by the clam magazine cloud Watch! Web GUI (http: // Cloud.watch.IMPRESS.Child.JP/DOCS/SPECIAL/YAMAHA/20141211_678846.I would like you to refer to "HTML".
高い性能が魅力のヤマハ「RTX1210」正面背面On the other hand, WLX302 is 2.4GHz IEEE 802.11b/g/n and 5GHz IEEE 802.The product is compatible with 11n/A, and the main unit is equipped with a 10BASE-T/100BASE-TX/1000BASE-T compatible port for LAN connection and an RJ-45 port for console (setting).Tags for corporate vlan (IEEE 802.It also has 1Q), SNMP (V1), and a simple RADIUS server function.
2.4GHz IEEE 802.11b/g/n and 5GHz IEEE 802.11n/aに対応したアクセスポイント「WLX302」正面背面The number of connection terminals is 2.A total of 100 units of 4GHz bands and 5GHz bands are a guide, so small offices, bases, and stores can cover enough performance.The scheduling function can be operated separately, so it is a product that can be operated according to the operating status of offices and stores.
The switch "SWX2200-8POE" is a product compatible with PoE (1, 3, 5, 7 ports for PoE Plus) equipped with a 150W class high-power power supply.This time, we use WLX302 only to operate with PoE, but of course it can be used for setting VLANs.
PoE対応のL2スイッチ「SWX2200-8PoE」正面背面
The basic setting flow is "Installation" → "Settings".It is said that it is natural, but in fact, this simple flow is often not possible.
As I mentioned a little at the beginning, in the case of network devices for companies, there are many patterns of taking out the box and the first thing to do.Before actually installing the device, at least you have to set the IP address of the device, you will not be able to manage it afterwards.
However, in this configuration, no prior settings are required.After removing the WLX302 from the box, it is possible to install it in the right place in the office, connect to SWX2200-8POE and turn on the power.
Isn't WLX302 lost on the network?Don't worry.After installation, open the RTX1210 Web GUI setting screen, enable the LAN map with the LAN1 interface, click the "LAN map" tab to SWX220-8POE connected to the RTX1210, and it will be connected to the subordinate.The WLX302 and the devices on the network are displayed in a graphical tree format.
LANマップを有効化RTX1210のLAN1（ポート1～8）に接続された端末がグラフィカルに表示されるThis time, it has a simple configuration, but when you witness it on a network that is actually operated, you have the impression that it has suddenly opened in front of you.For small and medium -sized companies that are not strictly managed, the network configuration may be difficult to think clearly on the head, but it is displayed in front of you in a neatly organized state.
Of course, not just displayed.The initial setting of the WLX302 that is suddenly installed without setting an IP address is also possible from here.
Click "Slave Management" with RTX1210 selected to perform basic management of switches on the network and wireless access points.Apparently, the IP address is assigned to the WLX302 with DHCP, so click the "Settings" button and assign a fixed IP address to make it easier to manage.
スレーブの管理から対応機器の設定を変更可能This time, there is only one WLX302, but if there are multiple wireless access points on the floor, it will be displayed here side by side, so you can easily assign an IP address one by one.
"Initial setting" → "Installation" → "Detailed setting" (or "Initial setting" → "Detailed setting" → "Installation") is completed in the simple two steps, "Installation" → "Settings". become.